About us

Schiess GmbH has experiene in machine tools for metal working over 150 years and more than 6.000 installed machines. We have two former companies:

Schiess (XXL-machines) from Düsseldorf and WEMA Aschersleben, former Billeter & Kluntz (middle size serial machines) from Aschersleben. Our Portfolio covers both segments actually.

Schiess GmbH has five columns or core competences:

  • XXL-machines
  • XL-machines 
  • service and retrofit 
  • aerospace
  • costumer individual machining and measurement.

In all competences we offer high quality by our employees. You have a special product manager for all categories - he's your direct contact partner!

Products and services

Schiess will present the following Highlights:

  • VertiMaster VMG: one of the largest machine tools in the world. Actual project: Floor plate 4.000 mm x 45.000 mm with double RAM
  • VertiMaster AERO 25: 5-axis machining center especially for aerosoace industry: "fast" and lighweight head, innovative clamping Technology, modular Extension of machine length, fast beam (5 m/s²)
  • Retrofit: Retrofit and Service of XXL-machines as well as all other machines (manufacturerer Independence)
  • machine head UB-MS 45: 2-axis head for aerospace industry with 30.000 rpm, +45° to -45° in 0.75 sec.
  • small machine series "ASCA"
Vertimaster VMG

Due to their modular design and flexible system configuration, these machines can be adapted to meet customer requirements. Any combination of manufacturing processes such as turning, drilling and milling can be realized. With the addition of the relevant accessories, grinding and boring can also be performed by our VMG. The machines are equipped with the most up-to-date drive and control engineering for the highest possible precision and optimal performance.

Further reading

VertiMaster AERO 25

The VertiMaster AERO are based on a modular machine design, which may be combined in various working areas, with different milling heads and control systems.
The standardised width (2.000 mm, 2.500 mm, 3.000 mm) is combinable with any length. The direct driven 2-axis head UB-MS 20 has 60 kW (S1) respectively 80 kW (S6) and 24.000 min-1. The weight is 560 kg only. These parameters result in combination with an acceleration of 5 m/s² in all axes in high dynamic and material removal rate!

Further reading

Retrofit & Serive

Retrofit of machine tools
XXL machine tools remain reliably in operation. So retrofitting a machine can certainly make economic sense. In close consultation with the customer, the SCHIESS service Team determines the scope of work. After modernization, machine is delivered to customer whose productivity and visual appearance is like that of a brand new machine, but at a fraction of the cost. SCHIESS covers all stages in the life cycle of a machine - from Project planning to retrofitting.

Further reading

Address
Schiess GmbH
Ernst-Schiess-Str. 1
06449 Aschersleben
Germany

Phone: +49 3473 968333
Internet: www.schiess.de
E-mail: Send message

Contact person

Jie He
Sales
Phone: +86 131 22025291
E-mail: Send message

News & Innovations

XXL-machine for aerospace industry

Schiess offers you in the segment XXLmachines our well-knownmultitasking-machine "Vertimaster" (turning, milling, grinding, boring…) in several sizes and configurations. The table width and face plate diameter vary from 3,000 mm up to 12,000 mm at machining heights up to 10,000 mm. Travels and loads are individually adapted to the customer's requirements.

We started a project VMG 4 in II/2017. These machine has two portals and a x-travel of 55.000 mm. The floor plate is 4.000 mm to 45.000 mm!

The consistent implementation of the Masterhead principle allows the customer to choose from a portfolio of potential machining heads.

VertiMaster AERO 25

Today’s aircraft construction places quite special demands on its machine tools, particularly in the field of dynamic and material removal rate. With the development of the first machines for aerospace industry SCHIESS established a solid basis more than 25 years ago and takes up an old tradition with the new developed machines. The SCHIESS CNC vertical machines VertiMaster AERO are based on a modular machine design, which may be combined in various working areas, with different milling heads and control systems.

The standardised width (2.000 mm, 2.500 mm, 3.000 mm) is combinable with any length (step of 1.000 mm). The direct driven 2-axis head UB-MS 20 has 60 kW (S1) respectively 80 kW (S6) and 24.000 min-1. The weight is 560 kg only. These parameters result in combination with an acceleration of 5 m/s² in all axes in high dynamic and material removal rate!

Additionally we show the UB-MS 45. Let yourself be surprised about the technical parameters and visit our booth!


Further reading

Click here if you notice an image that violates copyright or privacy rights.

Get in contact
OK

We use cookies and the web analysis tool Matomo in order to optimally design and continuously improve our website for you. By continuing to use our website, you agree to this. Further information and an objection possibility can be found here: Data protection